Using Local Management Screens; Local Management Screen Elements - Enterasys VHSIM2-A6DP User Manual

Using Local Management Screens

The following must be completed before configuring the VHSIM2-A6DP through Local
Management:
• Installation of an APIM in the VHSIM2-A6DP. Refer to
• Installation of the VHSIM2-A6DP in the host interface module or standalone device with the
host device operational. Refer to
• Configuration and proper connection of a Local Management terminal to the host interface
module or standalone device in which the VHSIM2-A6DP resides.
3.1 USING LOCAL MANAGEMENT SCREENS
Section 3.1.1 through
conventions and how to navigate through the Local Management screens of the VHSIM2-A6DP.
3.1.1

Local Management Screen Elements

There are five types of screens used in Local Management: password, menu, configuration, status,
and warning screens. Each type of screen can consist of one to five basic elements, or fields. Since
the top part of the screen contains the same type of information (the name of the screen, the switch
model number, the firmware revision, and the BOOT PROM revision), it is not shown in the
following descriptions of the screens. Only the lower portion of each screen is shown. The cutaway
line can be seen in Figure
Figure 3-1 shows an example of the fields in a screen. A description of each field follows the
figure.
NOTE: The following definitions apply to most Local Management screens. Exceptions
to these definitions may occur in the Local Management screens of some devices.
3-2 Local Management
Chapter 2
Section 3.1.3 describe Local Management screen elements, keyboard
3-1. The name of the screen is in the figure title for each screen.
Chapter 2
for instructions.
for instructions.