Selecting A Virtual Interface - Enterasys VHSIM2-A6DP User Manual

ATM Connection Setup By Virtual Interface Screen
Index (Read-Only)
Displays the traffic index assigned to each specific PVC.
NEXT (Command)
Allows the user to view the next page of information for the current virtual interface, if there are
more lines of connection information than will fit on the screen.
PREV (Command)
Allows the user to view the previous page of information for the current virtual interface, if there
are more lines of connection information than will fit on the screen.
3.7.1

Selecting a Virtual Interface

To specify which virtual interface to jump to, proceed as follows:
NOTE: Refer to the following sections to identify the virtual interface number that has
been assigned to each PVC and LEC respectively:
For PVCs, refer to
For LECs, refer to
1. Use the arrow keys to highlight the Virtual Interface #: field.
2. Using the number keys, enter the number of the virtual interface.
NOTE: The user may also press the SPACE bar or BACKSPACE key to scroll through
the virtual interfaces one at a time.
3. Press ENTER. All current connections for that virtual interface display on the screen.
3-26 Local Management
Section 3.3.
Section 3.12.