Table of Contents
Advertisement
Traffic Management Screen
3.18 TRAFFIC MANAGEMENT SCREEN
The Traffic Management screen is used to set up profile index traffic descriptors. Once the
descriptors are set up, they can be assigned to PVCs created in Connection Setup or LEC Transmit
Queue screens.
To access the Traffic Management Descriptor Profiles screen from the ATM menu screen, perform
the following steps:
1. Use the arrow keys to highlight the TRAFFIC MANAGEMENT menu item of the ATM menu
screen.
2. Press ENTER. The Traffic Management Descriptor Profiles screen,
Figure
3-20, displays.
Figure 3-20 Traffic Management Descriptor Profiles Screen
The following list explains each of the Traffic Management Descriptor Profiles screen fields:
Profile Index (Selectable)
The index number chosen here is used to create the traffic descriptor. The number chosen must be
greater than 32 (1 to 31 is reserved). The default traffic descriptors are displayed as 1 thru 9. The
first available new entry is displayed as "NEW ENTRY".
Profile Name (Selectable)
Used to enter a name for the chosen traffic descriptor.
Local Management
3-61
Advertisement
Table of Contents
