Table of Contents
Advertisement
CONNECTIONS BY VIRTUAL INTERFACE
This menu item, when selected, opens the ATM Connection Setup by Virtual Interface screen. This
screen is used to view all current connections (PVCs and SVCs) on an interface-by-interface basis.
Refer to
Section
3.7.
3.4
ATM CONNECTION SETUP SCREEN
The ATM Connection Setup screen is used to view the current configured virtual connections,
(PVCs and SVCs) on the VHSIM2-A6DP. This screen also allows the user to access the
Add/Delete Entry screen, which is used to create, modify, or delete PVCs.
To access the ATM Connection Setup screen from the ATM Connections screen, perform the
following steps:
1. Use the arrow keys to highlight the CONNECTION TABLE menu item on the ATM
Connections screen.
2. Press ENTER. The ATM Connection Setup screen,
Figure 3-5 ATM Connection Setup Screen
NOTE: The first two connections shown in
0, 16 respectively) represent UNI and ILMI. These two connections, even if they are
disabled in the Signalling screen
Connection Setup screen.
Figure
3-5, displays.
Figure 3-5
(Section
3.17), will always display on the ATM
ATM Connection Setup Screen
(with VPI, VCI values of 0, 5 and
Local Management
3-11
Advertisement
Table of Contents
