Table of Contents
Advertisement
Port (Read-Only)
Displays the application port number this has LEC has been dynamically assigned.
Index (Read-Only)
Displays the Index of the LEC.
LEC ID (Read-Only)
This value is dynamically assigned by the LES to uniquely identify this LEC.
Ver (Read-Only)
Displays the version of LAN Emulation (LANE) that the LEC is currently using.
ELAN ID (Read-Only)
This value is dynamically assigned by the LES to uniquely identify this ELAN.
ELAN Name (Read-Only)
Displays the name assigned to the Emulated LAN (ELAN) by the user in the LEC Administration
screen
(Section
3.13) or by the LECS.
LEC State (Read-Only)
Displays the current state of the LEC. The LEC goes through a series of initialization phases,
which may result in this field displaying different states as the initialization process proceeds. The
possible states are as follows:
NOTE: In most cases, the initialization process occurs very rapidly, and the following
initialization states, with the exception of "Operational", may not display.
•
Initial State - While in Initial State the LEC receives two types of configuration parameters:
•
From the User: LECS ATM Address, ELAN Name, MTU Size, and LAN Type.
•
From the ATM Switch: The ATM Address of the switch.
•
LECS Connect - During the LECS Connect phase, the LEC establishes a Configuration
Direct VCC with the LECS.
•
Configure - The Configure phase is where the LEC discovers the LES before going on to
the join phase.
LEC Table Screen
Local Management
3-39
Advertisement
Table of Contents
