Table of Contents
Advertisement
LEC Properties Screen
LEC STATE (Read-Only)
Displays the current state that the LEC is in. The possible states are as follows:
•
Initial State
•
LECS Connect
•
Configure
•
Join
•
Initial Registration
•
BUS Connect
•
Operational
Section 3.12
Status (Read-Only)
Displays the current status of the LEC. This field displays one of the following items:
•
Active (LEC is operational)
•
Not In Service (LEC is not operational)
•
No Link (No connection to the network)
•
No ATM Address (ILMI not operating, refer to
•
No UNI (UNI not operating, refer to
ELAN ID (Read-Only)
Displays the ID that this ELAN was assigned by the LES.
LANE Version (Read-Only)
Displays the LANE version that the LEC is using. This field will display 1.0 or 2.0.
LEC ATM ADDR (Read-Only)
Displays the ATM Address of the LEC.
LECS ATM ADDR (Read-Only)
Displays the ATM address of the LAN Emulation Configuration Server. If this LEC was
configured manually, this field can be empty.
LES ATM ADDR (Read-Only)
Displays the ATM Address of the LAN Emulation Server to which the LEC is connected.
BUS ATM ADDR (Read-Only)
Displays the ATM address of the Broadcast or Unknown Server to which the LEC is connected.
3-50
Local Management
provides definitions for the possible states of the LEC State field.
Section
3.17)
Section
3.17)
Advertisement
Table of Contents
