Table of Contents
Advertisement
Configure LEC (Toggle)
Used to specify if the LEC is configured manually by the user, or automatically by the
VHSIM2-A6DP. This field toggles between Automatic and Manual. For instructions on how to
configure the LEC automatically and manually, refer to
ELAN Name (Modifiable)
Used to provide a user-specified ELAN for this LEC to join. This field is modifiable when the LEC
is configured in both automatic and manual mode.
NOTE: If the LEC is created manually, the name entered in the ELAN Name field is the
ONLY ELAN the LEC will join. The LEC will not take another ELAN name from the LES.
MTU Size (Toggle)
Used to define the maximum MTU size that this LEC allows to be used. This field toggles between
[1516], [1580], and [Unspecified], with [1516] being the default value.
Selective Multicast (Toggle)
This field toggles between Disable and Enable, with a default value of Disable. The Selective
Multicast field is specific to LANE 2.0, and is not supported if LANE 1.0 is used.
LLC Multiplex Capable (Toggle)
This field toggles between Disable and Enable, with a default value of Disable. The Selective
Multicast field is specific to LANE 2.0, and is not supported if LANE 1.0 is used.
Topology Change Frames (Toggle)
This field toggles between Disable and Enable, with a default value of Disable.
NOTE: The LES ATM Address field does not display if the LEC is configured
automatically. Instead, the field reads LECS ATM Address. If the LEC is configured
automatically, the LES ATM Address is learned dynamically from the LECS.
LEC Administration Screen
Section 3.13.2
and
Section
Local Management
3.13.3.
3-41
Advertisement
Table of Contents
