Table of Contents
Advertisement
LEC Properties Screen
h. Press the SPACE bar to toggle between the options (Enable or Disable) until the desired
option displays.
i.
Use the arrow keys to highlight the Topology Change Frames field.
j.
Press the SPACE bar to toggle between the options (Enable or Disable) until the desired
option displays.
k. Use the arrow keys to highlight the LES ATM Address field.
l.
Enter the LES ATM Address in the field. Ensure that a valid ATM address is used.
9. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER. The changes will now be written to NVRAM, and the LEC will reflect the
modifications.
3.13.5 Deleting an Existing LEC
To delete an existing LEC, perform the following steps:
1. Use the arrow keys to highlight the LEC Index field.
NOTE: To discover the Index of the LEC that is to be deleted, refer to
2. Enter the LEC Index of the LEC that will be deleted.
3. Use the arrow keys to highlight the DELETE command at the bottom of the screen.
4. Press ENTER. The LEC is deleted.
3.14 LEC PROPERTIES SCREEN
The LEC Properties screen is a read-only screen that is used to view current information on
multiple LAN Emulation components.
To access the LEC Properties screen from the LAN Emulation Clients screen, perform the
following steps:
1. Use the arrow keys to highlight the LEC PROPERTIES menu item in the LAN Emulation
Clients screen.
2. Press ENTER; the LEC Properties screen,
3-48
Local Management
Figure
3-16, displays.
Section
3.12.
Advertisement
Table of Contents
