Table of Contents
Advertisement
3.1.3.2
Exiting Local Management Screens
There are two ways to exit Local Management (LM).
Using the EXIT Command
To exit an LM screen using the EXIT command, proceed as follows:
1. Use the arrow keys to highlight the EXIT command at the bottom of the Local Management
screen.
2. Press ENTER. The Password screen displays and the session ends.
Using the RETURN Command
1. Use the arrow keys to highlight the RETURN command at the bottom of the Local
Management screen.
2. Press ENTER. The previous screen in the Local Management hierarchy displays.
NOTE: The user can also exit Local Management screens by pressing ESC twice. This
exit method does not warn about unsaved changes and all unsaved changes will be
lost.
3. Exit from VHSIM2-A6DP Local Management by repeating steps 1 and 2 until the Main Menu
screen displays.
4. Use the arrow keys to highlight the RETURN command at the bottom of the Main Menu
screen.
5. Press ENTER. The Password screen displays and the session ends.
Using Local Management Screens
Local Management
3-7
Advertisement
Table of Contents
