Editing Local Accounts; E.8.1 Adding A Local Account - Fujitsu ScanSnap N1800 Operating Manual

E.8 Editing Local Accounts
This section describes how to edit the local accounts saved in the scanner.
Up to 100 local accounts can be added.

E.8.1 Adding a Local Account

1. Select the [Local Account] tab.
2. Open the [Add Account] dialog box in either of the following ways.
Select the [Local Account] menu, and then select [Add Account].
Press the [Add Account] button on the toolbar.
3. Enter the information of the local account to be added.
[User Name], [Password], and [Confirm Password] may be up to 64 characters
long. Passwords are case sensitive.
For details about e-mail address settings values, refer to
Setting Values" (page
For [Comment], enter a comment on the account. Up to 256 characters long
may be entered. [Comment] is case sensitive.
For [Enabled/Disabled], select whether or not to enable the account. When
[Disabled] is selected, the user cannot login.
For [Account Type], select [Regular User] for a regular user or select
[Administrator] for the administrator.
4. Press the [OK] button.
The local account is added.
483).
"guest", "admin", and "fi-maintenance" cannot be specified as a user name.
Spaces at the start and end of a user name are omitted if specified.
White space characters can be used in a password and comment.
516
"B.1 e-Mail Address