Failure To Print On A Network Printer - Fujitsu ScanSnap N1800 Operating Manual

■ Failure to Print on a Network Printer

If printing on a network printer which has been set in the scanner is not possible, try the
following steps. Also, refer to how to set printer settings, how to add a network printer, and
the printer manual beforehand.
Same as in "Failure to Connect to a Server Using Its IP Address" (page
451).
■ Action
Check if a network connection is possible by trying the same solution for
Server Using Its IP Address" (page
Printer is not usable, due to an out of paper error, paper jam, or similar
problem.
■ Action
Check whether or not the printer is ready for printing, deal with the cause of the error, and try
again.
Not authorized to print on network printer.
■ Action
Contact the administrator to check if printing is allowed on the network printer.
Printing is impossible due to a printer or spooler error.
■ Action
Try the following:
Check that printing is possible from the print server application.
Check that the print server spooling is operating normally.
451).
455
"Failure to Connect to a