Setting The Admin Connection - Fujitsu ScanSnap N1800 Operating Manual

4.8.8 Setting the Admin Connection

To use the Admin Tool or Central Admin Server for the scanner, perform the connection
settings.
1. Select [Network Settings]
The [Admin Connection] window appears.
2. For [SSL], select whether or not to enable SSL.
3. In [Port Number], enter a port number to be used by the scanner to
communicate with the Admin Tool or Central Admin Server.
4. Press the [OK] button.
The information entered is set.
For Central Admin Console, contents of the SSL Certificate are not shown.
Port numbers 135, 139, 445, and numbers from 1025 to 1124 cannot be
specified as they are already reserved in the scanner.
If port numbers other than HTTP "80", HTTPS "443" are to be specified, it is
recommended that numbers 5000 or above are used. If a port number lower
than 5000 is specified, verify the Admin Tool connectivity with the port
number first.
[Network Admin]
123
Central Admin
Console
[Admin Connection].