Fujitsu ScanSnap N1800 Operating Manual page 429

4. Insert the new pad assy.
Holding the new pad assy by its sides, insert into the pad assy socket.
Take care not to snag the pick springs.
Make sure that the pad assy is firmly and fully inserted. If it is not correctly
attached, document jams and other feeding errors may occur.
5. Close the top cover.
You should hear a click.
AUTION
6. Reset the pad assy usage counter.
The usage counter must be reset by an administrator. For details, refer to
"Resetting the Usage Counter" (page
Pad assy
Be careful that the top cover does not shut on your fingers.
171).
429