Cloning A Scanners Configuration; Editing Scanner Configuration - Fujitsu ScanSnap N1800 Operating Manual

■ Cloning a Scanners Configuration

This section describes how to clone a registered scanners configuration.
1. Press the [Config List] button in the Central Admin Console main
window.
The [Scanner Config List] window appears.
2. Select the check box for the scanner to be cloned.
3. Press the [Clone] button.
The [Edit Scanner Details] window appears.
4. Check and edit the scanner configuration.
5. Press the [OK] button.
The scanner configuration is added.

■ Editing Scanner Configuration

This section describes how to edit scanner configuration.
1. Press the [Config List] button in the Central Admin Console main
window.
The [Scanner Config List] window appears.
2. Select the check box for the scanner to be edited.
3. Press the [Edit] button.
The [Edit Scanner Details] window appears.
4. Change the details of the scanner configuration.
5. Press the [OK] button.
The changed scanner configuration is saved.
257