B.2 Scanner Configuration File Format; B.2.1 Scanner Configuration File Format (For Importing) - Fujitsu ScanSnap N1800 Operating Manual

B.2 Scanner Configuration File Format

The scanner configuration file format requirements differ for the following two cases.
For importing
For exporting

B.2.1 Scanner Configuration File Format (for Importing)

This section describes the scanner configuration file format requirements for importing.
The file character set should be the same as the value on the Central Admin
Console, [Central Admin Server Settings] window. The default value is UNICODE
(UTF-8).
The file is in CSV format. The values for each item are as follows.
MAC Address
IP Address
Subnet Mask
Scanner Name
Port Number
Use HTTPS?
Model
Add-in Group
Settings Group
Comment
System Updates
(*1):
Item
XX:XX:XX:XX:XX (X is an alphanumeric
character)
xxx.xxx.xxx.xxx (xxx is a value from 0 to
255)
xxx.xxx.xxx.xxx (xxx is a value from 0 to
255)
Up to 15 alphanumeric characters long
(hyphens may also be used)
Numerical value from 1 to 65535
0: Do not use HTTPS (default)
1: Use HTTPS
Up to 64 characters long
Up to 32 characters long (*1)
Up to 32 characters long (*1)
Up to 256 characters long
0: Enable (default)
1: Disable
The following character strings cannot be used:
(Default) (All)
"__" is two underbars entered one after another.
Value and Format
__default__ __all__
484
Remarks
Optional
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional