Restoring The User Data Store; Clearing The User Data Store - Fujitsu ScanSnap N1800 Operating Manual

■ Restoring the User Data Store

The scanner's user data store can be restored from a backed-up user data store file.
Restoring user data overwrites all user information stored at the time of restoration,
and returns all e-mail address books, fax number list, and scan settings to the time
the backup was taken.
During user data restoration, do not press and hold down the power button for
longer than 4 seconds, as it may cause the scanner to function abnormally.
User logs cannot be backed up, therefore cannot be restored.
1. Select [Monitoring & Management]
Store].
The [User Data Store] window appears.
2. Select a user data store backup file.
Press the [Browse] button to select a file.
3. Press the [Restore] button.
An "OK to overwrite?" confirmation message appears.
4. Press the [Yes] button.
After the user data store is restored, a restore completion message appears.
5. Press the [OK] button.

■ Clearing the User Data Store

Clearing the user data store cannot be undone.
Even if the user data store is cleared, the local accounts are not removed. To
remove the local accounts, use the User Editor. For details about how to edit the
local accounts, refer to
1. Select [Monitoring & Management]
Store].
The [User Data Store] window appears.
2. Press the [Clear] button.
The delete confirmation window appears.
3. Press the [Yes] button.
The user data store is cleared.
4.15 Managing the User Data Store and System Settings
"E.8 Editing Local Accounts" (page
180
[Data Management]
516).
[Data Management]
[User Data
[User Data