Configuring The System; Setting The Scanner Name - Fujitsu ScanSnap N1800 Operating Manual

4.5

Configuring the System

4.5.1 Setting the Scanner Name

Set a scanner name to provide a network alias for the scanner.
Do not use a name already being used in the network.
Name duplication will cause a network connection error. For details about how to
deal with such errors, refer to
1. Select [System Settings]
The [Scanner Name] window appears.
2. Enter a [Scanner Name].
3. In the [Member of] section, specify the scanner as a [Workgroup] or
[Domain] member.
4. Enter a workgroup name or domain name in the input field.
5. Press the [OK] button.
The restart confirmation window appears.
"4.18.1 Administrator Window Messages" (page
[Local Settings]
94

4.5 Configuring the System

[Scanner Name].
225).