Updating The System - Fujitsu ScanSnap N1800 Operating Manual

5.9

Updating the System

The system, security, and installed options can be updated by uploading a new system
update module and setting update calls.
The new system update module will be released, and applied to the scanners when one
of the following occurs:
Scanner is started, or resumed from the standby mode
Scanner is logged out
Scanner is notified of any update modules
Scanner has an automatic update scheduled
Updates can be applied to the scanners that are in power-off or standby mode using
Wake-On-LAN.
In the following cases, update modules cannot be uploaded.
The module type is either a system or security option, and the same or upgraded
module version has already been registered
For an installed option update module, the same update module is already
uploaded
Add-ins can be updated according to the time specified on the scanner side.
For details, refer to
1. Select the [System Updates] link in the [Scanner Admin Operations]
window of the Central Admin Console.
The [System Updates] window appears.
"4.8.9 Setting a Central Admin Server" (page
To cancel release of the update module, press the [Cancel] button to delete
the module.
261
125).