Backup/Restore Command Messages; Information; Error - Fujitsu ScanSnap N1800 Operating Manual

5.18.3 Backup/Restore Command Messages

Backup/restore command messages which may appear during central admin operations
can be arranged into the following two categories:

Information

Error

Backup/restore command messages will be shown on the command prompt.
■ Information
Code
0A040001
0A040002
0A040003
0A040004
■ Error
Code
7A040010
7A040011
7A040012
7A040013
Message
Starting backup.
Finishing backup.
Starting restore.
Finishing restore.
Message
Scanner Central Admin
Server is not installed.
Backup folder has not been
specified.
Backup folder does not exist.
Backup folder contents are
invalid.
No action required.
Central Admin Server software is not
installed.
Try again in a Central Admin Server
that has been correctly installed.
The backup file name is not specified
in the parameters of the backup
command and restore command.
Specify the backup file, and try again.
Specify the backup folder that was
specified with the backup command,
and try again.
Or, check the read privilege for the
specified backup folder.
The backup folder specified in the
parameter for the restore command is
not a backup folder for Central Admin
Server. Specify the Central Admin
Server backup folder and try again.
290
5.18 Messages
Action
Action