Fujitsu ScanSnap N1800 Operating Manual page 204

7. If [e-Mail] is selected for the job item in
to sending e-mail.
For details about setting values, refer to
(page 309).
Press the [Browse] button to set a different e-mail address from the [LDAP
List] window.
To filter the LDAP List, refer to
details.
Press the [Name Format] button to specify a file name on the [File Names (e-
Mail)] window. For details about setting values, refer to
Name Format for When Attaching Scanned Data to e-Mail" (page
4.17 Setting a Job Sequence
Step 6, perform settings related
"6.4 Sending the Scanned Data by e-Mail"
"Filtering the LDAP List" (page 209)
204
for more
"4.10.3 Setting a File
140).