E.7.3 Setting An E-Mail Address; Adding An E-Mail Address - Fujitsu ScanSnap N1800 Operating Manual

E.7.3 Setting an e-Mail Address

Set an e-mail address in the mail address book.

■ Adding an e-Mail Address

1. Select the [Address Book] tab.
2. Select a group to which the new distribution list is to be added.
3. Open the [Add Address] dialog box in either of the following ways.
Select the [Address Book] menu, and then select [Add Address].
Press the [Add Address] button on the toolbar.
4. Enter the information of the e-mail address to be added.
[First Name] and [Last Name] may be up to 64 characters long. [First Name] and
[Last Name] can be skipped.
For details about e-mail address settings values, refer to
Setting Values" (page
5. Press the [OK] button.
The e-mail address is added.
483).
514
"B.1 e-Mail Address