Processing A Job - Fujitsu ScanSnap N1800 Operating Manual

6.14 Processing a Job

This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the [Job Menu] window, press the [Job] button.
The Message Screen appears.
When you are included in multiple job groups, the [Job Menu] windows can be
switched by using the job menu switch buttons on the [Job Menu List] window,
which appears when a list button is pressed.
If either the title or message is not set in [Message Screen] on the [Job
Details] window, even when [Message Screen] is set to [On], the [Message
Screen] will not be shown. For details, refer to
Sequence" (page 201).
If [Off] is selected for [Message Screen], scanning is started without showing
the [Message Screen], and the job is processed.
For details, refer to
408).
When [Message Screen] is disabled, whether or not the [Message Screen] is
shown depends on the settings configured by the administrator.
"6.14.1 Enabling/Disabling the Message Screen" (page
405
Step 4 of "4.17.2 Setting a Job