Table of Contents
Advertisement
I
P
NTEGRATED
SuperIO Device
Onboard IDE Channel 1
Onboard IDE Channel 2
IDE Prefetch Mode
OnChip SATA
SATA Mode
AC97 Audio
VIA OnChip LAN
Onboard LAN Boot ROM
OnChip USB Controller
OnChip EHCI Controller
: Move
Enter: Select
F5: Previous Values
Onboard IDE Channel 1 and 2
The integrated peripheral controller contains an IDE interface with support
for two IDE channels.
Setting
Enabled
Disabled
IDE Prefetch Mode
This allows the hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive.
transfer, multiple commands or multiple sector read / write.
Setting
Enabled
Disabled
OnChip SATA
Settings: [Enabled, Disabled]
ERIPHERALS
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[IDE Controller]
[Auto]
[Enabled]
[Disabled]
[All Enabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Description
Activates each channel separately
Deactivates IDE channels
Description
Block mode
Standard mode
Menu Level
Select IDE controller for install
Win2000 / WinXP on your
SATA Hard Driver.
Otherwise, select SCSI
controller for Win98SE /
WinMe installation.
F10: Save
ESC: Exit
F7: Optimized Defaults
Block mode is also called block
59
BIOS Setup
Item Help
F1: General
Help
Advertisement
Table of Contents
