Table of Contents
Advertisement
All manuals and user guides at all-guides.com
14
BIOS Features Setup
This section allows you to configure your system for basic operation. You have
the opportunity to select the system's default speed, boot-up sequence,
keyboard operation, shadowing and security.
Chipset Features Setup
The Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
This section allows you to configure the system based on the specific features
of the installed chipset. This chipset manages bus speeds and access to
system memory resources, such as DRAM and the external cache. It must be
stated that these items should not be altered. The default settings have been
chosen because they provide the best operating conditions for your system.
Power Management Setup
The Power Management Setup Menu allows you to configure your system to
most save energy while operating in a manner consistent with your own style
of computer use .
PNP/PCI Configuration Setup
This section describes how to configure the PCI bus system. This section
covers some very technical items and it is recommended that only experienced
users should make any changes to the default settings.
Integrated Peripherals
The Integrated Peripherals Setup allows the user to configure the onboard
IDE controller, floppy disk controller, the printer port and the serial ports.
Supervisor/User Password Setting
You can set either supervisor or user password, or both of them. The difference
between them are:
Supervisor Password :
User Password :
When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
Technical Reference Booklet
You can enter the Setup Program and change
the options of the setup menus.
You can enter the Setup Program but cannot
change the options of the setup menus.
Advertisement
Table of Contents
