Chapter 3
Typematic Rate (Chars/Sec)
This item sets the rate (characters/second) at which the system retrieves a
signal from a depressed key.
Settings: [6, 8, 10, 12, 15, 20, 24, 30]
Typematic Delay (Msec)
This item sets the delay between when the key was first pressed and when
the system begins to repeat the signal from the depressed key.
Settings: [250, 500, 750, 1000]
Security Option
Selects whether the password is required every time the System boots, or
only when you enter Setup.
Setting
Setup
System
Display Full Screen Logo
Show full screen logo during BIOS boot up process.
Settings: [Enabled, Disabled]
Display Small Logo
Show small energy star logo during BIOS boot up process.
Settings: [Enabled, Disabled]
Description
Password prompt appears only when end users try to run
BIOS Setup
Password prompt appears every time when the computer is
powered on and when end users try to run BIOS Setup
54
Need help?
Do you have a question about the EPIA-SP8000E - VIA Motherboard - Mini ITX and is the answer not in the manual?