Table of Contents
Advertisement
Chapter 3
S
S
ET
UPERVISOR
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP / PCI Configurations
PC Health Status
ESC : Quit
F10 : Save & Exit Setup
This option is for setting a password for entering BIOS Setup.
password has been set, a password prompt will be displayed whenever BIOS
Setup is run. This prevents an unauthorized person from changing any part
of your system configuration.
There are two types of passwords you can set. A supervisor password and a
user password.
program can be accessed and the BIOS settings can be changed. When a
user password is used, the BIOS Setup program can be accessed but the
BIOS settings cannot be changed.
To set the password, type the password (up to eight characters in length)
and press <Enter>. The password typed now will clear any previously set
password from CMOS memory. The new password will need to be reentered
to be confirmed. To cancel the process press <Esc>.
To disable the password, press <Enter> when prompted to enter a new
password. A message will show up to confirm disabling the password. To
cancel the process press <Esc>.
/ U
P
SER
ASSWORD
Phoenix - AwardBIOS CMOS Setup Utility
Enter Password:
F9 : Menu in BIOS
Change / Set / Disable Password
When a supervisor password is used, the BIOS Setup
Frequency / Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
78
When a
Advertisement
Table of Contents
