Integrated Peripherals - VIA Technologies P4PA User Manual

BIOS Setup

Integrated Peripherals

Onboard IDE Channel 1/2
The integrated peripheral controller contains an IDE interface with sup-
port for two IDE channels. Choose Enabled to activate each channel
separately. Settings: Disabled, Enabled.
IDE Prefetch Mode
This allows your hard disk controller to use the fast block mode to trans-
fer data to and from the hard disk drive. Block mode is also called block
transfer, multiple commands or multiple sector read/write. Enabled ena-
bles IDE controller to use block mode; Disabled allows the controller to
use standard mode.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to trans-
fer data to and from the hard disk drive. Block mode is also called block
transfer, multiple commands or multiple sector read/write. Enabled ena-
bles IDE controller to use block mode; Disabled allows the controller to
use standard mode.
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings: PCI Slot and AGP.
3-13