5-3
Modes
Mode types
Mode
Program operation
Constant-value operation
READY
The following modes are available on the DCP301.
Program operation
Constant-value operation
Operation is carried out according to SP, times, events, etc. set to program patterns No.1
to 19.
Operation is carried out according to SP or events set in the constant-value operation
data. Time events 1 to 5 turn OFF.
In this mode, the DCP301 is ready for operation.
MV output is fixed, and events to be operated according to event setting values turn OFF.
However, events to be operated according to controller states are active.
Parameters for all of the setup data, some event configuration data and some constant-
value operation data can be set or changed in the READY mode. During program opera-
tion, program pattern Nos.1 to 19 can be selected.
READY
RUN
HOLD
FAST
END
READY
RUN
Chapter 5. FUNCTIONS
AUTO
MANUAL
AUTO
MANUAL
AUTO
MANUAL
AUTO
MANUAL
AUTO
MANUAL
AUTO
MANUAL
AUTO
MANUAL
5-11