Honeywell DCP301 User Manual page 6

Unpacking
Check the following when removing the DCP301 from its package.
1. Check the model No. to make sure that you have received the product that you ordered.
2. Check the DCP301 for any apparent physical damage.
3. Check the contents of the package against the Package List to make sure that all accessories are included
in the package.
After unpacking, handle the DCP301 and its accessories taking care to prevent damage or loss of parts.
If an inconsistency is found or the package contents are not in order, immediately contact your dealer.
Product List
Body
Mounting bracket
User's Manual
Unit indicator label
(SI units)
Request
The filter on the front of the controller is Covered with a protective film to protect the surface of the controller.
When you have finished mounting and wiring the controller, fix cellophane adhesive tape on the corners of the
filter, and pull in the direction of the arrow to peel off the protective film.
Handling Precautions
Name Model No.
81405411-001
EN1I-6197
XX XX XX
XX XX
XX XX XX X
XX XX
XX XX
XX XX Ma nu al
Us er s
N-3132
Pull towards you.
Peeling off the protective film with your fingernail might scratch the
surface of the controller.
iv
Q'ty Remarks
1 See 1-5 How Model Nos.
Are Configured, page 1-5.
The Model No. is the parts
1 set (2)
No. for two installation tools.
1
This manual
1