Panel Cutout Dimensions - Honeywell DCP301 User Manual

Chapter 3. MOUNTING
3-2

Panel Cutout Dimensions

Use a steel panel of at least 2mm in thickness for mounting the controller.
Handling Precautions
3-2
Panel cutout dimensions
92 +0.8
0
Panel cutout dimensions when mounting units horizontally and vertically (recommended)
99 min. (when horizontally mounted)
When mounting the controller, take care to prevent the temperature at the lower
surface of the controller's case from exceeding the operating temperature range
(0 to 50 C), particularly when mounting vertically or during multiple mounting.
Panel cutout dimensions during multiple mounted
46 96 x (N - 1)
96 x N - 4
N=number of units installed
(107 min. when hard dust-prevention
cover is used)
Unit: mm
(recommended)
46