Table of Contents
Advertisement
GuestWorks and DEFINITY ECS Release 8
Hospitality Operations 555-230-723
Hospitality Operations
Front Desk Operations
Canceling Wakeup Calls
Once a wakeup call has been delivered successfully, the request is canceled
automatically. However, you can cancel a wakeup call manually before it is
delivered by doing the following:
NOTE:
1. Press the
AUTO WAKEUP - Ext:
2. If you are already on an active call with the guest requiring the
cancellation, the extension number is displayed automatically. Press the
button to select the displayed extension.
If you are not connected to the room requiring wakeup, enter the room
number, followed by the
WAKEUP
AUTO WAKEUP - Ext: <ext> Time: <hh:mm>
3. To cancel the displayed wakeup call, press the
wakeup call, go to
WAKEUP REQUEST CANCELED
4. Press the
CONFIRMED. 2nd WAKEUP:
5. To cancel the displayed wakeup call, press the
WAKEUP REQUEST CANCELED
With Dual Wakeups, you can delete only one wakeup call at a time.
You must do this procedure twice to delete both wakeup calls.
button.
AUTO WAKEUP
The Auto Wakeup lamp goes on.
The following displays:
#
button again and start over.)
The following displays:
Step 4.
The following displays:
If the Dual Wakeup feature is enabled, you must repeat this
procedure starting with
normal operating mode.
button twice to skip the first wakeup call.
#
The following displays:
The following displays:
The console returns to the normal operating mode.
button. (If you make a mistake, press the
DELETE
Step 1.
Otherwise, the console returns to the
Time: <hh:mm>
DELETE
Issue 6
December 1999
36
#
AUTO
button. To skip that
button.
Advertisement
Table of Contents
