Lucent Technologies GuestWorks and DEFINITY Enterprise Communications Server Operation Manual page 34

GuestWorks and DEFINITY ECS Release 8
Hospitality Operations 555-230-723
Hospitality Operations
Front Desk Operations
6. If you want to use a different wakeup message, enter the wakeup message
number.
7. Press the
CONFIRMED. 2nd WAKEUP:
8. Enter the second wakeup time in the 4-digit hh:mm format (hour:minute).
WAKEUP MESSAGE: XXXX
AUTO WAKEUP - Ext: <ext> Time: <hh:mm> -M
9. Press the
wakeup call.
WAKEUP MESSAGE: XXXX
10. The display shows the default wakeup message number. If you want to use
the default message, go to
If you want to use a different wakeup message, enter the wakeup message
number.
NOTE:
You cannot specify a different wakeup message when setting
up a wakeup call from a backup telephone. You can use only
the default wakeup message.
button to confirm the wakeup request.
#
The following displays:
If a second wakeup request already exists for the room, the time
field will show the time of the request.
If you entered a time between 13:00 and 00:59, the following
displays if the request is accepted; if denied, see the reasons under
step 11:
Go on to Step 10.
If you entered a time between 01:00 and 12:59, the following
displays:
button for an a.m. wakeup call, or press the
2
The following displays:
NOTE:
You cannot specify a different wakeup message when setting
up a wakeup call from a backup telephone. You can use only
the default wakeup message.
Time: --:--
Step 11.
Issue 6
December 1999
30
button for a p.m.
7