Lucent Technologies GuestWorks and DEFINITY Enterprise Communications Server Operation Manual page 14

GuestWorks and DEFINITY ECS Release 8
Hospitality Operations 555-230-723
Hospitality Operations
Guest Operations
Change or Delete Your Wakeup Call
1. Pick up the handset of your telephone and press the wakeup button, or enter
the Automatic Wakeup Call feature access code _____.
2. If you want to change the wakeup time that you entered earlier, press the
button.
3. If you want to delete your wakeup call completely, press the
4. Hang up the telephone.
With Wakeup Activation Via Tones
Provide the following procedures to your guests to activate and deactivate wakeup
calls if the Wakeup Activation via Tones feature is activated. The Dual Wakeup
feature is required if you want to allow your guests to have two wakeup calls.
Guests cannot activate a Daily Wakeup or a VIP Wakeup.
Add or Change Your Wakeup Calls
Access to the Automatic Wakeup feature may be from a button on the guest
telephone or by using a feature access code.
1. Pick up the handset of your telephone and press the wakeup button, or enter
the Automatic Wakeup Call feature access code _____.
2. Using the dial keypad, enter the time that you wish to receive a wakeup
call. The time must be entered using the 24-hour clock format (for
example, 0900 is 9 a.m. and 2230 is 10:30 p.m.).
3. Hang up the telephone.
Listen to the wakeup instructions. You will hear "You have reached
the automatic wakeup service. Your current request for a wake-up
call is _____. Press the
delete."
You will now go through the original procedure for entering a
wakeup time again. Your new time will replace the old time.
You will hear the message "Thank you. Your request has been
canceled." You can hang up.
You will hear recall dial tone (3 short tones, followed by dial tone).
You will hear confirmation tone (3 short tones, followed by silence).
If you make a mistake, you may hear intercept tone (siren tone).
Hang up and start over.
If you hear reorder tone (fast busy), the switch cannot accept your
request at this time. Try again later, or call the front desk.
button to change; press the
2
Issue 6
December 1999
10
button to
3
2
button.
3