Lucent Technologies GuestWorks and DEFINITY Enterprise Communications Server Operation Manual page 55

GuestWorks and DEFINITY ECS Release 8
Hospitality Operations 555-230-723
Hospitality Operations
Front Desk Operations
User Operation
The user operation for updating and viewing housekeeping status using the PMS
is given in the PMS documentation.
You can check the current status of all rooms based on the housekeeping status
codes defined for your switch (refer to
information about status codes).
NOTE:
To check the current room status, perform the following:
1. Press the
Enter Desired Room State (1-6)
2. Press a number between 1 and 6 (refer to
definitions).
<requested room status>
3. Press one of the DXS hundreds select buttons.
4. You can enter different status codes to see the rooms that are in the
different housekeeping states.
5. Press the
6. If you are not sure which rooms are available, press the
button.
If your switch has a PMS that supports Housekeeping Status, use this
feature from the PMS, not the console. The only exception to this is if
the link to the PMS is not operational.
button.
MAID STATUS
The Maid Status lamp goes on.
The following displays:
The following displays:
The LEDs in the upper part of the selector console light for all
rooms that match the requested status.
button when finished.
NORMAL MODE
The console returns to the normal operating mode.
The lamps associated with the rooms already occupied will display
on the DXS selector console. Determine an unoccupied room from
this information.
''Status Codes'' on page 67
page 66 for the status code
Issue 6
December 1999
51
for more
OCCUPD ROOMS