Configuring The Infrared Settings For Fir - EUROCOM D270ES VIPER User Manual

Configuring the Infrared Settings for FIR

For Models A & B only - Users will need to change the settings for the infra-
red device in the BIOS (see
on page 5 - 12) to enable the FIR setting support.
To configure your computer for Fast Infrared (FIR) communication follow
these steps:
1. Click Start, point to Settings and click Control Panel.
2. Double-click Wireless Link icon.
3. Click Hardware (tab), then click Properties (button).
4. Select Advanced (tab).
5. Select "Infrared Transceiver A" and change the Value to "HP HSDL-
2300/3600".
6. Click OK > OK.
For further information, please refer to the manual of the device you wish to
connect.
"I/O Device Configuration (Advanced Menu)"
Configuring the Infrared Settings for FIR 3 - 25
Advanced Controls
Infrared
Communication
The infrared transceiv-
er operates on a "Line
of Sight".
Make sure nothing is
blocking the "Line of
Sight" between your
system's transceiver
and the destination's
transceiver.
3