Configuring The Infrared Settings For Fir - EUROCOM Notebook User Manual

Configuring the Infrared Settings for FIR

To configure your computer's infrared port (on the right of the computer) for Far In-
frared (FIR) communication follow these steps:
1. Click Start, and click Control Panel (or point to Settings and click Control
Panel).
2. Double-click Infrared (Network and Internet Category) icon.
3. Click Hardware (tab), and click the Properties button.
4. Click the Change settings button and click Advanced (tab).
5. Select "Infrared Transceiver A" and change the Value to "HP HSDL-2300/
3600".
6. Click OK > OK.
7. Restart the computer if prompted to do so.
You can enable/disable the infrared transceiver in the BIOS (see
Control Sub-Menu (Advanced Menu)" on page 5 -
please refer to the manual of the device you wish to connect.
Storage Devices, Mouse, Audio & Printer
"National 381 SIO
10). For further information,
Configuring the Infrared Settings for FIR 2 - 11
Infrared
Communication
The infrared transceiver
operates on a "Line of
Sight".
Make sure nothing is
blocking the "Line of
Sight" between your
system's transceiver
and the destination's
transceiver.
2