Video (Winxp); Usb 2.0 (Winxp); Hot-Key (Winxp) - EUROCOM D270ES VIPER User Manual

9. Navigate (Browse...) to
D:\Drivers\LAN\WINXP and click OK
(button), then click Next.
10. Click Finish and close the open windows.
11.The network settings can now be configured.

Video (WinXP)

1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\VIDEO\Win2K&XP\SETUP.EX
E and click Open > OK.
3. When the Welcome screen appears click Next >
Next > Next > Next.
4. Click Finish to restart the computer.
5. See "Advanced Video Controls" on page 3 - 2
for details on adjusting the video settings.

USB 2.0 (WinXP)

The USB 2.0 driver is only required for Model A
(see "USB Port Type" on page 1 -
USB 2.0 Driver - Service Pack 1
Install Windows XP Service Pack 1. The USB 2.0
driver will be automatically installed in your system
during the Service Pack 1 installation.

Hot-Key (WinXP)

1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\HOTKEY\CNK001.exe and click
Open > OK.
3. Choose the language you prefer, and click OK.
4. Click Next.
5. Click Finish to restart your computer.
6. You may then configure your Hot-Key Buttons
as outlined in "Hot-Keys" on page 2 -
Drivers & Utilities
5).
14.
Windows XP 4 - 9
4