Configuring The Infrared Settings For Fir - EUROCOM Notebook User Manual

Configuring the Infrared Settings for FIR

To configure your computer for Fast Infrared (FIR) communication follow
these steps:
1. Click Start, point to Settings and click Control Panel (or click Start > Con-
trol Panel).
2. Double-click Wireless Link (Printers and Other Hardware Category)
icon.
3. Click Hardware (tab), and click the Properties button, then click the
Advanced (tab).
4. Select "Infrared Transceiver A" and change the Value to "HP HSDL-
2300/3600".
5. Click OK > OK.
For further information, please refer to the manual of the device you wish to
connect.
The computer's Consumer Infrared transceiver may be used with the remote
control supplied with the optional TV Tuner (see
Rear Views" on page 1 - 11
Storage Devices, Mail Program, Mouse, Audio & Printer
"System Map: Front &
& "The TV Tuner Module" on page 7 -
Configuring the Infrared Settings for FIR 2 - 15
Infrared
Communication
The infrared transceiv-
er operates on a "Line
of Sight".
Make sure nothing is
blocking the "Line of
Sight" between your
system's transceiver
and the destination's
transceiver.
8).
2