Table of Contents
Advertisement
Advanced Controls
3
3 - 10 Display Options
Switching/Enabling Displays (Keyboard)
To simply switch display devices, or enable other devices, with the Fn +
Display (F6) toggle do the following:
1. Plug the VGA monitor or TV into the appropriate port.
2. Press and hold the Fn key, while simultaneously pressing the F6 key.
3. You may toggle through the options to display the LCD only, the LCD
and the external display together, and the external display alone
(make sure you allow time for the screens to refresh as you toggle
through).
Note: If you only use the keyboard toggle to switch through the display op-
tions you will not have all the configuration options available to you. If you
want to use the options listed in
the driver control panel to configure the settings as per
abling Displays (Driver)" on page 3 -
"Display Options" on page 3 - 9
11.
then use
"Switching/En-
Advertisement
Table of Contents
Need help?
Do you have a question about the D270ES VIPER and is the answer not in the manual?
Questions and answers