Configuring The Infrared Settings For Fir - EUROCOM M590K User Manual

Storage Devices, Mouse, Audio & Printer
2
Infrared
Communication
The infrared transceiver
operates on a "Line of
Sight".
Make sure nothing is
blocking the "Line of
Sight" between
system's transceiver
and the destination's
transceiver.

2 - 12 Configuring the Infrared Settings for FIR

Configuring the Infrared Settings for FIR
To configure your computer's infrared port (on the right of the computer) for Far In-
frared (FIR) communication follow these steps:
1. Click Start, point to Settings and click Control Panel (or just click Start > Control
Panel).
2. Double-click Wireless Link (Printers and Other Hardware Category) icon.
3. Click Hardware (tab), and click the Properties button, then click the Advanced
(tab).
4. Select "Infrared Transceiver A" and change the Value to "HP HSDL-2300/
your
3600".
5. Click OK > OK.
6. Restart the computer if prompted to do so.
You can enable/disable the infrared transceiver in the BIOS (see
figuration (Advanced Menu)" on page 5 -
to the manual of the device you wish to connect.
"I/O Device Con-
9). For further information, please refer