Configuring The Network Boot Protocol - EUROCOM D270ES VIPER User Manual

BIOS Utilities
Enabling Network
Boot
Go to the Boot Menu.
Set the Network Boot
5
option to the first prior-
ity in the list.
Save the changes and
exit.
At startup, press and
hold the Shift and F10
keys.
Configure the network
protocol.
Save the settings to
automatically
from the network.
Figure 5 - 7
Boot Agent Menu
5 - 18 Boot Menu

Configuring the Network Boot Protocol

The system supports booting from FDD, HDD, CD or LAN. To boot from a
network, set Network Boot as the first item in the boot order. Follow the full
instructions in the sidebar to configure the network boot protocol.
Network Boot Protocol
Boot Order
Show Config Message
Show Message Time
boot
Always boot network first, then local devices
<Esc>
Quit
Realtek RTL8139(A/B/C)/RTL8130 Boot Agent
Configuration Menu v2.11
PXE
RPL
Int 19h
Enable
3 Seconds
<Space> <Enter>
Change Value Next Option
<F4>
Save/Quit