Table of Contents
Advertisement
Advanced Controls
3
Switching Display
Modes
To switch back from
Multimonitor mode to
either Mirror or Single
Mode, you will be re-
quired to restart the
computer.
3 - 12 Display Options
Mirror Mode
In this mode the display of the two devices is the same. Mirror mode simply
shows an exact copy of the Primary display desktop on the Secondary dis-
play. This mode will drive multiple displays with the same content. Use this
feature to display the screen through a projector for a presentation etc.
Setting Mirror Mode
1. Follow the instructions in
on page 3 - 11
(make sure Auto is unchecked).
2. Choose the Mirror option from the Driver mode drop box.
3. Choose a device to be Primary, and one to be Secondary.
4. Click OK > OK to apply the settings (you may need to give your VGA
monitor a few seconds to refresh).
5. Click Yes to keep the settings.
"Switching/Enabling Displays (Driver)"
Advertisement
Table of Contents
Need help?
Do you have a question about the D270ES VIPER and is the answer not in the manual?
Questions and answers