Display - EUROCOM D270ES VIPER User Manual

Display

Problem
Nothing appears on
screen.
The system is in a power saving mode. Toggle the suspend/resume key combination, Fn +
Esc (see "Function Keys and Numeric Keypad" on page 2 -
\
The screen controls need to be adjusted. Toggle the screen control key combinations Fn +
F9/F10 (see "Opening the LCD" on page 3 -
monitor, make sure it's plugged in and turned on. You should also check the monitor's own
brightness and contrast controls.
The computer is set for a different display. Toggle the screen display key combination, Fn
+ F6 (see "Switching/Enabling Displays (Keyboard)" on page 3 -
monitor is connected, turn it on.
The screen saver is activated. Press any key or touch the TouchPad.
Possible Cause - Solution
2). If you're connected to an external
Troubleshooting
16).
10). If an external
Display 7 - 9
7