Removing The Upper Housing - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880

4.2.1 Removing the Upper Housing

Since the printer mechanism itself structures the bottom part, the printer
mechanism appears just by removing the Upper Housing.
1) Open the printer cover and turn the PG adjustment lever towards (+) side.
2) Remove 4 screws (No.8) securing the Upper Housing, and remove it
upward. Refer to Figure 4-2.
Lift up and remove the Upper Housing, pulling it forward.
(Since it collides with the carriage)
After assembling the Upper Housing, confirm the Head FFC is
placed in the gutter which is located at the back side of the of
the Upper Housing.
In case the Head FFC is not placed in the gutter, it may
damage the head FFC.
To prevent Head FFC damage, the Upper Housing is mounted
over the Head FFC to hold A4-size paper longitudinally. Lift
up the paper from the front of the printer and tighten the
Upper Housing screws, or the Upper Housing may damage
the Head FFC.
Disassembly and Assembly
Figure 4-2. Removing the Upper Housing
Disassembly Procedures
Revision A
Upper Housing
No.8 Screws
No.8 Screws
82