EPSON Stylus COLOR 880
4.2.4.3 Removing the Ink System Assembly
NOTE: The Pump Assembly and Cap Assembly are included in the Ink System
Assembly
1) Remove the Upper Housing. (Refer to Section 4.2.1.)
2) Remove the Operation Panel. (Refer to Section 4.2.3.)
3) Remove one screw (No.1) securing the Right Sub Frame. Refer to Figure
4-12.
Right Sub Frame
Figure 4-12. Removing the Right Sub Frame
4) Remove the Waste Ink Absorber Tray Assembly (Refer to Section 4.2.4.2.)
5) Raise the Printer Mechanism toward ASF side so that you can see the
bottom of the Printer Mechanism. Refer to Figure 4-13.
Disassembly and Assembly
NO.1 Screws
Disassembly Procedures
Raise the printer mechanism
in the direction indicated with
the arrow.
Figure 4-13. Raising the Printer Mechanism
Revision A
91