Tools - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880
Risque d'explosion si la pile est remplacée incorrectment. Ne
remplacer que par une pile du même type ou d'un type
équivalent recommandé par le fabricant. Eliminer les piles
déchargées selon les lois et les règles de sécurité en
vigueur.
Never remove the ink cartridge from the carriage unless
this manual specifies to do so.
When transporting the printer after installing the ink
cartridge, be sure to pack the printer for transportation
without removing the ink cartridge.
Use only recommended tools for disassembling,
assembling or adjusting the printer.
Apply lubricants and adhesives as specified. (See Chapter
6 for details.)
Make the specified adjustments when you disassemble the
printer.
(See Chapter 4 for details.)
When assembling, if an ink cartridge is removed and needs
to be installed again, be sure to install a new ink cartridge
because of the following reasons;
Once the ink cartridge mounted on the printer is removed,
air comes into and creates bubbles in the cartridge. These
bubbles clog ink path and cause printing malfunction.
If an ink cartridge in use is removed and is reinstalled, ink
quantity will not be detected correctly since the counter to
check ink consumption is cleared.
Because of the reasons above, make sure to return the
printer to the user with a new ink cartridge installed.
Disassembly and Assembly

4.1.2 Tools

Table 4-1 lists the tools recommended for disassembling, assembling, or
adjusting the printer. Use only tools that meet these specifications.
Tools
(+) Driver No.2
(+) Driver No.1
Tweezers
Hexagon Box Driver
(Opposite side:5.5mm)
Overview
Table 4-1. Tool List
Commercially
Code
Available
O.K. B743800200
O.K. B743800100
O.K. B741000100
O.K. B741700100
Revision A
78