Epson Stylus COLOR 880 Service Manual page 67

EPSON Stylus COLOR 880
Table 3-9. Remedies for Fatal Error (continued)
Step Detail Phenomenon
• Make sure if the ASF unit is not assembled to the
9 When the Printer is
suitable position as following figures
turned on,
• it dose not sound
the hopper
moving.
• it sounds as if the
gear tooth strike
noisy and the ASF
Hopper dose not
move.
Combination Gear 14,28
After that, the Fatal
Error is indicated on
the Panel LED.
10 When the Printer is Make sure that the Torsion Spring 0.618 is hung to
turned on, the ASF between the DE lock lever and the hook on the DE
dose not move at all. unit as following figure.
After that, the Panel
LED indicates the
Fatal Error
Troubleshooting
Check & Actions
Gear 32
Torsion Spring 0.618
DE Lock Lever
Overview
Revision A
67