Adjustment By Adjustment Program - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880

5.2.3 Adjustment by Adjustment Program

The adjustment program is exclusive for Windows: the OS that allows
operation of this program is Windows 95. The following shows programs
included in this program.
This adjustment program operates only under Windows
95: This program does not operate under DOS or Windows
3.X, NT.
This adjustment program automatically install the
appropriate program according to your OS.
Perform this adjustment program using parallel I/F port or
USB. When you use the USB for this adjustment program,
it is available under Windows 98.
This adjustment program is composed of the following two main programs.
Individual service adjustment program
This program provides you the adjustment item individually as same as the
previous adjustment program. The available functions are as following table.
Table 5-4. Individual service adjustment program
No. Main Menu
1 Adjustment
2 Maintenance items
3 Check pattern printing
4 Appendix
The user interface of the main menu on this program is shown below.
Adjustment
Service
Head ID input
Bi-d adjustment
USB ID input
Head cleaning
Initial ink charge
Refurbishment for DOA
Protection counter check / reset
A4 check pattern print
EEPROM check / White
Adjustment
Figure 5-8. Individual service adjustment program main menu
Sequential repair service program
This program provides you the suitable adjustment order in the program
according to the repair parts. The available functions are as following table.
Table 5-5. Sequential repair service program
Repair item
Printhead removal
1
2 Printhead replacement
3 Main board replacement
4 CR Unit replacement or removal
5 CR Motor replacement
6 Printer mechanism replacement
7 Waste Ink pad replacement
Revision A
Included Adjustment item
Nozzle check,
Bi-d adjustment.
Head ID Input, Initial charge,
Nozzle check, Bi-d adjustment.
Head ID input, Bi-d adjustment,
USB ID input
Bi-d adjustment
Bi-d adjustment
Head ID input, Initial ink charge,
Nozzle check, Bi-d adjustment
Protection counter reset
125