Epson Stylus COLOR 880 Service Manual page 112

EPSON Stylus COLOR 880
13) Remove the PF Encoder Detector Assembly by releasing the three hooks
from the Printer Mechanism. Refer to Figure 4-58.
Three Hooks
Figure 4-58. Removing the PF Encoder Sensor
14) Release the fixed hook of the Left Bushing 12 holding the PF Roller
Assembly and turn the bushing forward to align it with the cut in the Left
Frame. Refer to Figure 4-59.
Gear 57
Left Bushing 12
holding the PF Roller
Figure 4-59. Setting the protrusion on Bushing 12
Disassembly and Assembly
PF Roller Assembly
Disassembly Procedures
15) Slide the PF Roller Assembly to the left side carefully and pull it out from
the Printer Mechanism. Refer to Figure 4-60.
PF Roller Assembly
Figure 4-60. Removing the PF Roller Assembly
Revision A
112