Disassembly and Assembly
3.2.2 Removing the Upper Housing Assembly
1. Remove the printer cover assembly, edge guide assembly, ribbon cartridge, tractor assembly,
platen knob, and optional color upgrade kit.
2. Remove 4 CPB (M4 x 12) screws attaching the upper housing assembly to the lower housing
assembly.
3. Lift off the upper housing assembly.
Figure 3-3. Removing the Upper Housing Assembly
3.2.2.1 Removing the Eject
1. Remove the upper housing assembly ( see Section 3.221).
2. Lift the eject roller assembly up and atan angle from theupperhousing assembly.
when removing the eject ro//erassemb/y, or the 500 g spring may pop out.
Note:
User care
Figure 3-4. Removing the Eject Roller Assembly
3-6
Roller Assembly
Upper Housing Assembly
Housing Assembly
Upper Housing Assembly